[ Pobierz całość w formacie PDF ]
ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
MERCEDES CLK * 02 ’! DIESEL
’!
MAKE MOD. YEAR.
* Models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens behind the passenger s side headlamp.
POSITION
CENTRAL UNIT POSITION Position the modular systems and the modules behind the foot rest, under the passenger s
side rug.
POWER SUPPLY +30: connect to the main wire that supply the fuse box.
- 31: connect to a ground terminal behind the left lateral bulkhead, driver s side.
IGNITION WIRE +15/54: connect to the 1,5mm2 RED/BLUE wire, in the wiring harness of the 4 way
connector, in the connectors holder box, in the passenger s side engine compartment.
DIRECTION INDICATORS For the front indicators: connect to the BLACK/GREEN wire at the position nr. 7 and
BLACK/WHITE at the position nr. 8 in the 28 way black connector located in the fuse box,
in the engine compartment under the support of the relay and fuses.
For the rear indicators: connect to the BLACK/WHITE wire, at the position nr.9 and
BLACK/GREEN wire at the position nr. 12, in the 14 way black connector, located on the
central placed in the driver s side boot. Divide the lines with diodes.
ELECTRIC WINDOWS Comfort closing
The windows locking is obtained using the original radio control of the vehicle.
ACTIVAT./DEACTIVATION Connections antitheft/vehicle
CONTROLS 38XX Vehicle Position
YELLOW/BLACK YELLOW/BLUE Pos. nr.2 of the light blue connector
GREY/BLACK YELLOW/GREEN Pos. nr.3 of the light blue connector
VIOLET ground car body
ORANGE ground car body
VIOLET/WHITE ground car body
ORANGE/WHITE ground car body
The 4 way light blue connector is located on the coming out of the central placed in the
boot.
IMMOBILISATION POINT Fuel pump
Cut the BLACK/GREEN wire, at the position nr. 3, in the 7 way black connector, on the
central placed in the driver s side boot.
STARTER +50: Cut the VIOLET wire, in the 6 way violet connector, in the fuse box, in the engine
compartment, under the support of the relay and fuses.
BONNET SWITCH Connect to the BROWN/RED wire, at the position nr.8, in the 12 way black connector, on
the central located in the driver s side boot.
DOORS SWITCH Connect to the wires: BROWN/GREY position nr. 6, BROWN/BLUE position nr.11, in the
12 way black connector, on the central located in the driver s side boot.
BOOT SWITCH Connect to the BROWN/YELLOW wire, at the position nr. 16, in the 28 way black
connector, on the central placed in the driver s side boot.
meclk02gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
[ Pobierz całość w formacie PDF ]